Etekcity MSR-R500 Digital Multimeter Review

Etekcity MSR-R500 Multimeter Review

Etekcity understands that households, hobbyists and electricians need practical digital meters for day-to-day use. And in this Etekcity MSR-R500 Multimeter Review, we will let you know everything that it can do.

The company released the MSR-R500 Digital Multimeter, which comes with features for measuring resistance, voltage, and current.

The device comes with a tough rubber sleeve for protecting it against falls and drops.

Etekcity designed the device by considering that it can handle the toughest jobs.

A multimeter is very important to measure and test your device power capabilities. If you’re really searching for a reliable multimeter then the MSR-500(check price on Amazon) be the best choice. It has all the capabilities you’ll need and it is user-friendly.

Although, testing your devices is not hard at all. I have been using it for about 2 years and it has done a good job with all my testing.

Without further due, here is our Etekcity MSR-R500 Digital Multimeter Review.

MSR-R500 Specs & Features

You can use the MSR-R500 to repair, assemble or diagnose circuitry and wiring. Its notable features include tough rubber sleeve for protection, continuity, ty buzzer and low battery indicator.

Discussed below are the specs and features of the digital Multimeter that make it ideal for everyday use. If you want to learn more about how to use a multimeter then read this short easy post.

1. Data Hold Button

The Data Hold button is for keeping the measurements displayed on the digital Multimeter as you record them.

When pressed, the button enables you to remain consistent as you record the measurements for accuracy. It aims at keeping you productive when using the MSR-R500.

2. LCD Backlight

The LCD backlight feature makes the meter useful in areas with dim light. You will not have to strain your eyes when taking measurements in such settings.

The meter also comes handy in areas with sufficient light.

3. Protective Rubber Sleeve and Continuity Buzzer

MSR-R500 can resist potential physical damage from falls and drops thanks to its protective sleeve.

The sleeve makes the device ideal for use in contexts with lightweight or tough jobs. It reduces the chances for buying another Multimeter especially when you lose the current one to physical damage.

The continuity buzzer helps check if your electrical components are in a good working condition.

4. Manual Range Dial

The manual range dial helps you choose a suitable range for measuring resistance, voltage and current.

It can improve the productivity of electrical engineering students who have difficulties when selecting a good measurement range.

It can also help pro electricians that like to set the range dial when taking measurements.

5. Battery Included

Etekcity MSR-R500 features one Supercell 6F22 9V battery. It can only run on the 9V alkaline batteries recommended by Etekcity.

You can rely on the low battery indicator to check the battery levels of your meter.

6. Sampling Speed of 2 Times Per Second

With a metric measurement system, the meter can take less than 2 times per second when used to measure current and voltage.

It maintains the same sampling speed when taking measurements of resistance, continuity, and diode.

7. 1-Year Warranty

MSR-R500 is among the devices made by Etekcity that come with a one-year warranty.

The warranty is applicable to device impairments and malfunctions. More details about the warranty are available on the company’s website.

How to Set Up the MSR-R500 for Use

It will take you less than 5 minutes to set up the Etekcity MSR-R500 digital multimeter before using it.

The multimeter has three basic functions. These include testing continuity, testing voltage, and testing resistance.

A continuity test lets you know if there is a connection between two electrical components.

1. Unplug the Components You Want to Test from the Power Source

Make sure that no current is passing through the component or circuit you want to test. If the component runs on batteries, remove the batteries. If it relies on direct current, be sure to unplug it from the wall outlet.

2. Plug the Black and Red Probes into Your MSR-R500 Meter’s Ports

Plug the black probe of the component into your meter’s COM port. Remember to plug the red probe into your meter’s VΩmA port.

The black probe represents the negative charge while the red one represents the positive charge.

3. Take the Voltage Measurements

To get precise voltage, resistance or continuity measurements, your digital multimeter should be on. As you turn it on, set the dial to continuity mode (with an icon resembling a sound wave). You can get the continuity readings if you connected the probes properly.

If the screen displays OL or 1, there’s no continuity. Consequently, if it displays zero or a value near zero, there’s continuity.

To measure voltage, set the dial to DC voltage mode. You should also set the dial to resistance mode to measure resistance.

What are Pros & Cons of the MS-R500

The features and specifications included in MSR-R500 make it advantageous and disadvantageous in different ways.

The advantages of the device outshine the disadvantages. They are as follows:

Pros

1. Safety Protection Features

Etekcity is reputable for including safety and protection features on its wide range of products.

The MSR-R500 features an overload protection. It also has a protective rubber sleeve around it for preventing physical damage caused by drops or falls.

2. Ease of Use

Features such as the LCD backlight and Data Hold button make MSR-R500 easy to use.

You can press the Data Hold button for the measurement to continue appearing on the screen.

The LCD backlight, on the other hand, allows you to take measurements in dimly lit settings.

3. Helpful Troubleshooting and Accurate Measurements

You can rely on MSR-R500 to give you accurate measurements of continuity, diode, resistance, current, and voltage.

You can use it accurately and safely to troubleshoot your household electrical issues.

The meter also comes handy when troubleshooting electrical issues on automobiles.

Cons

1. Can’t Measure Capacitance

Etekcity MSR-R500 is a reliable meter for testing AC current. However, it can’t help you take capacitance measurements.

You need to use it depending on the application range stated in the user manual. We though adding this con to our Etekcity MSR-R500 Multimeter Review was extremely important if you’re working with advance projects in Arduino.

2. No Auto Switch Off Feature

The meter does not switch off automatically when left idle. It tends to drain the batteries when you accidentally leave it running.

You should always turn it off when you are not using it. Etekcity should also consider including the auto switch off feature on future digital multimeters’.

3. Instructions for Amateurs are Missing in the User Guide

Though the Etekcity MSR-R500 meter seems to have a good build quality, it comes with a less comprehensive user manual.

The user guide does not have instructions on how you can read and understand the display labels. It does not have illustrations on how you can remove the protective caps on the cable ends.

Should You Buy Etekcity MSR-R500?

You can buy Etekcity MSR-R500 (Amazon) if you are looking for a battery-powered meter that is easy to use.

The meter also suits you if you want to use it for troubleshooting automotive or household electrical issues. It proves useful when taking current, voltage, continuity and resistance measurements.

You may find it less suitable for buying since it cannot measure capacitance.

Did you like our Etekcity MSR-R500 Multimeter Review? Give it share.

Leave a Comment